link Seal Sizing Charts.pdf

link Seal Sizing Charts

The sizing of a seal is an important factor to consider when purchasing one. If the seal is too small, it will not be effective in keeping water out.

If the seal is too large, it will be difficult to install and may not provide an adequate seal. Seal sizing charts can help you determine the correct size for your specific application.

There are several factors that need to be considered when selecting a seal size:

  • the width of the gap to be sealed,
  • the pressure or vacuum that will be applied, and
  • the type of material that the seal will come into contact with.

Charts are typically provided by the manufacturer of the seal and can vary depending on the type of seal being used.

link Seal Sizing Chart

Click here to Download Link Seal Sizing Chart in pdf.

Most seals are available in a range of sizes, and it is important to select the proper size for the application.

Is Link seal waterproof?

There is some debate as to whether or not the Link seal is actually waterproof. Some people say that it is, while others claim that it is not.

There have been tests conducted in both directions, but the results have been inconclusive.

One thing that is for sure, however, is that the Link seal does repel water.

So, if you are in a situation where you need to keep water out, the Link seal will do a good job of doing that.

But, if you are looking to use the seal in an environment where it will be constantly exposed to water, then you may want to look for something else.

Benefit of Link Seal Sizing Chart

When you are looking to purchase a link seal, the size of the seal is an important consideration.

A sizing chart can help you determine which size will work best for your needs. There are a few benefits to using a sizing chart.

One benefit is that you can be sure that the seal will fit properly. This is important, as a seal that does not fit well will not provide the desired level of protection.

Additionally, using a sizing chart can help you save money. If you select a seal that is too large or too small for your application, you may end up wasting money on a seal that does not perform as expected.

A sizing chart can also help you choose the right material for your application.

For example, if you need a seal that can withstand extreme temperatures, you will want to select a material that is able to withstand those temperatures.


How do I determine the size of the seal I need?

Seal size is typically determined by the shaft diameter or rod size that it will be used on. It is important to measure the shaft or rod to ensure the correct size seal is used.

Can I use a seal that is slightly larger or smaller than the shaft size?

It is not recommended to use a seal that is larger or smaller than the shaft size as it may not provide a proper seal. It is important to use the correct size seal to ensure proper function and prevent leaks.

What are common seal sizes?

Common seal sizes include metric sizes such as 10mm, 12mm, 15mm, and 20mm, as well as standard sizes such as 1/2″, 3/4″, and 1″.

Can I use a seal that is not the exact size of my shaft or rod?

It is not recommended to use a seal that is not the exact size of the shaft or rod. It may not provide a proper seal and could cause leaks or damage to the equipment.

Can I use a seal with a different cross-section than my original seal?

It depends on the application and the equipment being used. It’s best to consult the equipment manufacturer or a seal expert to determine if a seal with a different cross-section can be used.