Pumping Skid

What is a Pumping Skid?

A pumping skid is a standalone unit that consists of a pump or pumps, a motor, and a base frame.

It is used to transfer fluids from one location to another and is commonly found in the oil and gas industry, chemical processing plants, and water treatment facilities.

Pumping skids are designed to be portable and can be easily moved to different locations as needed.

They are often used when it is not practical or cost-effective to install a permanent piping system.

Pumping skids are available in a variety of sizes and configurations to meet the specific needs of each application. They can be used to transfer a wide range of fluids, including water, oil, natural gas, and chemicals.

Pumping Skid (image: steelmaster)

Main Parts of a Pumping Skid

The main parts of a pumping skid include:

  • Pump: The pump is the main component of the pumping skid and is responsible for moving the fluid from one location to another. There are several types of pumps that can be used on a pumping skid, including centrifugal pumps, reciprocating pumps, and lobe pumps. The type of pump used will depend on the specific application and the characteristics of the fluid being pumped.

  • Motor: The motor is used to drive the pump and usually an electric motor is used. The size and type of motor used will depend on the specific requirements of the application, including the flow rate and pressure needed.

  • Base frame: The base frame is the structural component of the pumping skid and provides support for the pump and motor. It is typically made of steel and is designed to be sturdy and able to withstand the loads and stresses of the pumping process.
See also  AISI 304 Stainless Steel (18-8 stainless steel): The Facts You Need to Know

  • Valves: Valves are used to control the flow of fluid through the pumping skid. They can be manually or mechanically operated and can be used to start and stop the flow of fluid or to regulate the flow rate.

  • Piping: Piping is used to connect the various components of the pumping skid and to route the fluid from the inlet to the outlet. The type of piping used will depend on the specific requirements of the application, including the fluid being pumped and the required flow rate and pressure.

  • Control panel: The control panel is used to operate and monitor the pumping skid. It typically includes switches, gauges, and other instruments that allow the operator to start and stop the pump, monitor the flow rate and pressure, and diagnose any problems that may occur.

Pumping Skid Design Considerations

There are several design considerations that need to be taken into account when designing a pumping skid.

These include the type and size of the pump, the type of motor, the material of construction, the required flow rate and pressure, and the fluid being pumped.

The pump and motor should be sized to meet the required flow rate and pressure, and the material of construction should be selected based on the chemical compatibility of the fluid being pumped.

There are several types of pumps that can be used on a pumping skid, including centrifugal pumps, reciprocating pumps, and lobe pumps.

The type of pump used will depend on the specific application and the characteristics of the fluid being pumped.

See also  Quality Control Inspection - Why it's Important

What is a booster pump skid?

Booster pump skids are an essential part of many industries, from water treatment and irrigation to oil and gas.

They are designed to provide a reliable source of pressure for a variety of applications, such as increasing the flow rate of liquids or increasing the capacity of an existing system.

Booster pumps typically require minimal installation and maintenance, making them an ideal choice for any business looking to increase their efficiency.

Booster Pump Skid (Image- Skidsolutions)

A booster pump skid is essentially a package consisting of one or more pumps that are pre-mounted onto a common base frame.

This allows for easy transportation and installation at the desired location. Most booster pump skids also come with additional components like filters, flanges, valves, and pressure gauges which can be used to customize the system’s performance according to specific requirements.

Uses of Pumping Skids

In terms of uses, pumping skids are used in a wide variety of industries and applications. In the oil and gas industry, they are used to transfer fluids such as crude oil, natural gas, and water.

In chemical processing plants, they are used to transfer chemicals and process fluids. In water treatment facilities, they are used to transfer water and wastewater.

Overall, pumping skids are a versatile and efficient way to transfer fluids from one location to another.

They are commonly used in the oil and gas industry, chemical processing plants, and water treatment facilities, and are designed to meet the specific needs of each application.


Material Welding is run by highly experienced welding engineers, welding trainers & ASNT NDT Level III bloggers. We strive to provide most accurate and practical knowledge in welding, metallurgy, NDT and Engineering domains.