Welding rods 6013 uses

The 6013 welding rod is a mild steel electrode that is used for welding in all positions. It is known for its smooth, stable arc and easy-to-use characteristics. This makes it a great choice for both novice and experienced welders alike.

The main elements in E6013 welding rod coatings are cellulose, potassium silicate, rutile (titania) and ferromanganese.

Benefits of 6013 Welding Rod

The 6013 electrode is also known for its smooth arc, low spatter and easy clean-up.

This is because it is coated with a mineral-based flux (titania potassium), which helps to minimize the amount of spatter and slag (self-detachable) that is produced during the welding process.

Read more: E6013 Welding Electrode Specification, Properties and applications.

Another benefit of using 6013 welding rods is that they can be used on a variety of different materials, including mild steel, carbon steel, low-alloy steel and cast steel. This makes them a versatile option for a wide range of welding applications.

E6013 stick electrode

One of the most common uses for 6013 welding rods is for welding structural steel. The mild steel electrode is perfect for welding beams, columns, and other structural elements.

It is also commonly used in the construction and manufacturing industries for welding heavy equipment, machinery, and vehicles.

In addition to structural steel, 6013 welding rods can also be used for welding sheet metal, pipes, and other thin materials.

Read more: E6013 vs E6011 vs E7018 vs E7016.

Forney E6013
Welding Rod,
3/32-Inch
hobart-e7018Hobart E6013
Welding Rod

Pros and Cons of 6013 Rod

When using 6013 welding rods, it is important to keep in mind that they have a low penetration depth. This can be an issue when welding root run or fillet welds.

See also  Good Weld vs. Bad Weld: How to tell the Difference

This means that they will not be as effective for welding thick materials. If you are working with thicker materials, you may need to use a different type of electrode.

Although this is the main benefit of this rod as low penetrating power make it the best rod for sheet metal welding.

Welding rods 6013 uses

The main applications of E6013 Welding rods are listed below:

1.     Structural Steel

The 6013 welding rod is perfect for welding beams, columns, and other structural elements.

It is commonly used in the construction and manufacturing industries for welding heavy equipment, machinery, and vehicles.

2.     Sheet Metal

In addition to structural steel, 6013 welding rods can also be used for welding sheet metal, pipes, and other thin materials.

E6013 welding rod is a Perfect Choice for Structural Thin Materials welding due to its low penetrating arc power.

3.     Heavy Equipment and Machinery

This welding rod is perfect for welding heavy equipment and machinery in the construction, mining, and manufacturing industries. 6013 rod is easy to use and readily available.

4.     Automotive and Transport Industry

6013 welding rod is also used for welding vehicles such as cars, buses, and trucks. They are the best choice to repair automotive sheet metals parts.

4.     Welding Downhill

E6013 welding rod is good for welding in downhill position. This is especially beneficial when welding large structures.


Which is better 6011 or 6013 welding rod?

Both 6011 and 6013 are good welding rods. One is beneficial for one application while other is advantageous for another application.
For example: 6011 is good for welding root run or rusty parts due to their high penetrating ability.
While 6013 is beneficial for welding sheet metal due to low penetrating ability.

See also  What is open circuit voltage in welding

Can 6013 be used with AC power?

Yes, 6013 welding rod can be used with AC as well as DCEP & DCEN polarity.

What welding positions can you weld 6013?

E6013 is an all position welding rod and can be used for Flat, horizontal, vertical and overhead welding positions.

Can I use 6013 welding rod for cast iron?

No, 6013 welding rod is not for welding cast iron. Although you can use it for welding Cast Steel. The best welding rods for cast iron welding are nickel base.

What does the 3 stand for in 6013?

The digit 3 in 6013 welding rod refers to its coating type and welding polarity i.e. AC, DCEP and DCEN.

Can I weld aluminum with 6013?

No, 6013 welding rods are not designed for welding aluminum. They are made for welding mild steel and low-alloy steel. 6013 rods are not suitable for welding aluminum.

What type of rod is 6013?

6013 is a type of welding rod known as a mild steel electrode. It is a coated electrode that is used for welding in all positions. It is composed of a mild steel core wire coated in a mineral-based flux.

Other Welding Rods:

Material Welding is run by highly experienced welding engineers, welding trainers & ASNT NDT Level III bloggers. We strive to provide most accurate and practical knowledge in welding, metallurgy, NDT and Engineering domains.